Canon D78-5132 Service Manual Download Page 75

Page: 75 / 134

3.3 Relay Lens Adjustment

[Before adjustment]

• Adjustment requires a 2.0mm hex driver and a slot screwdriver.
• Remove cabinet top following to “Mechanical Disassemblies”.

[Adjustment]

1. Turn on lamp by a state of without FPC

cable of LCD panels.

2. Adjust the adjustment base of relay lens

ass’y to make color uniformity in white.
If the color shade appears on the left or right
of the screen as shown in Fig.3-15, loosen a
screw

with the 2.0mm hex driver and

adjust the slot

to make color uniformity in

white by using a slot screwdriver.

3. Tighten the 1 screw

to fix the relay lens

unit.

Part 3: Adjustment

3-19

Fig. 3-15

CAUTION

Do not disconnect the connectors on main and component boards
otherwise the projector can not be turned on.

Summary of Contents for D78-5132







































































































































Search results

Summary of Contents for D78-5132

Reviews:

Related manuals for D78-5132

Brands by name

Popular brands

Canon D78-5132, Service Manual

Search results

Summary of Contents for D78-5132

Reviews:

Related manuals for D78-5132

Brands by name

Popular brands