background image

Contents

(10)

7.  Daily Inspection and Maintenance................................................................................. 38

7.1 Inspection .............................................................................................................................38

7.1.1 Before Turning ON the Power ..................................................................................................... 39
7.1.2 Turning ON the Power  ................................................................................................................ 40

7.2 Before Calling a Service Technician  ....................................................................................41

7.2.1 Troubleshooting  .......................................................................................................................... 41

7.3 Cleaning and Disinfection .....................................................................................................44

7.3.1 Objective Lens  ............................................................................................................................ 44
7.3.2 Viewfinder  ................................................................................................................................... 45
7.3.3 Forehead Rest  ............................................................................................................................ 45
7.3.4 Retinal Camera and Digital Camera Outer Covers ..................................................................... 46

7.4 Refilling the Chin Rest Paper  ...............................................................................................47
7.5 Removing and Installing the Digital Camera  ........................................................................48

7.5.1 Removing the Digital Camera  ..................................................................................................... 48
7.5.2 Installing the Digital Camera  ....................................................................................................... 50
7.5.3 Cleaning the Digital Camera (imaging sensor)  ........................................................................... 52

8.  Main Specifications and Performance ........................................................................... 53

8.1 Main Specifications  ..............................................................................................................53
8.2 Functions in the Observation and Photography Modes  .......................................................54
8.3 Guidance and Manufacturer’s Declaration for EMC Directive ..............................................55

9.  Service Information........................................................................................................ 59

Summary of Contents for CX-1











































































Reviews: