background image

2

FCC REGULATIONS (For 120V model)

Check Reader, Model M111101/M111102
This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept 
any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class 
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential installation. 
This equipment generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 
of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise 
specified in the manual. If such changes or modifications should be made, you could 
be required to stop operation of the equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success NY 11042, U.S.A.
Tel. No. (516)328-5000

RADIO INTERFERENCE REGULATIONS (For 120V models)

This digital apparatus does not exceed the Class B limits for radio noise emissions 
from digital apparatus as set out in the interference-causing equipment standard 
entitled “Digital Apparatus”, ICES-003 of the Industry Canada.

RÈGLEMENT SUR LE BROUILLAGE RADIOÉLECTRIQUE (For 
120V models)

Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux 
appareils numériques de Classe B prescrites dans la norme sur le materiel brouilleur: 
“Appareils Numériques”, NMB-003 édictée par l’Industrie Canada.

International ENERGY STAR

®

 Office Equipment Program

As an ENERGY STAR

®

 Partner, CANON ELECTRONICS INC. has 

determined that this machine meets the ENERGY STAR

®

 Program 

guidelines for energy efficiency.
The International ENERGY STAR

®

 Office Equipment Program is an 

international program that promotes energy saving through the use 
of computers and other office equipment.
The program backs the development and dissemination of products with functions 
that effectively reduce energy consumption. It is an open system in which business 
proprietors can participate voluntarily. The targeted products are office equipment, 
such as computers, monitors, printers, fax, machine, copiers, and scanners. The 
standards and logos are uniform among participating nations.

Important Notice for ENERGY STAR Office Equipment Program.
This model doesn’t provide “setting options” for power management.

European Union (and EEA) only.

This symbol indicates that this product is not to be disposed of with your 
household waste, according to the WEEE Directive (2002/96/EC) and 
your national law. This product should be handed over to a designated 
collection point, e.g., on an authorized one-for-one basis when you buy 
a new similar product or to an authorized collection site for recycling 
waste electrical and electronic equipment (EEE). Improper handling of 

this type of waste could have a possible negative impact on the environment and 
human health due to potentially hazardous substances that are generally associated 
with EEE. At the same time, your cooperation in the correct disposal of this product 
will contribute to the effective usage of natural resources. For more information about 
where you can drop off your waste equipment for recycling, please contact your local 
city office, waste authority, approved WEEE scheme or your household waste disposal 
service. For more information regarding return and recycling of WEEE products, 
please visit www.canon-europe.com/environment.
(EEA: Norway, Iceland and Liechtenstein)

Für EMVG

Dieses Produkt ist zum Gebrauch im Wohnbereich, Geschäfts-und Gewerbebereich 
sowie in Kleinbetrieben vorgesehen.

Model Names

The following names may be provided for the safety regulations in each sales region 
of the Check Reader.
CR-50: Model M111101
CR-80: Model M111102

Summary of Contents for CR-50

























Reviews: