13
13
Settings after Installation
Settings after Installation
Settings after Installation
1) At the Main menu, press [Printer].
2) Press [Printer Status/Settings].
3) At the Languages Setup screen, select the name of the language you want to use, and
then select OK.
Wait a few minutes.
F-1-36
F-1-37
Input of password:
When setting it up, the password input screen is displayed.
Entering "Fiery.1" in the password field displays the setting screen.
NOTE:
Use single-byte upper case to enter F of "Fiery.1". Use single-byte lower case to enter
other characters.
In response, the machine will automatically show the Settings menu. Be sure to at least
select the following and make the appropriate settings in the indicated order: [Server
Setup], [Network Setup], and [Printer Setup].
For more information, see "Settings Management" on the User Manual.
For instance, once you have made the various settings under [Server Setup], you will be
shown a screen asking you if you want to store the settings. Select [yes] so that the system
will be stored in memory. Unless you have made appropriate settings in the correct order
and saved them, you will not be able to go on to the next item.
F-1-38
Summary of Contents for ColorPASS-GX400
Page 28: ......
