8
8
8-14
8-14
Service Mode > COPIER > ADJUST > PASCAL
Service Mode > COPIER > ADJUST > PASCAL
■
PASCAL
COPIER > ADJUST > PASCAL
M82 M85
OFST-P-Y
Y density adj at test print reading
○
○
Details
To adjust the offset of Y color test print reading signal at
Auto Adjust Gradation (Full Adjust).
When replacing the Main Controller PCB, enter the value
of service label.
As the greater value is set, the image after adjustment
gets darker.
Use case
• When replacing the ADF/Reader Unit
• When replacing the Main Controller PCB
Adj/set/operate method Enter the setting value (switch negative/positive by -/+
key) and press OK key.
Caution
After the setting value is changed, write the changed
value in the service label.
Display/adj/set range
-32 to 32
Default value
0
OFST-P-M
M density adj at test print reading
○
○
Details
To adjust the offset of M color test print reading signal at
Auto Adjust Gradation (Full Adjust).
When replacing the Main Controller PCB, enter the value
of service label.
As the greater value is set, the image after adjustment
gets darker.
Use case
• When replacing the ADF/Reader Unit
• When replacing the Main Controller PCB
Adj/set/operate method Enter the setting value (switch negative/positive by -/+
key) and press OK key.
Caution
After the setting value is changed, write the changed
value in the service label.
Display/adj/set range
-32 to 32
Default value
0
OFST-P-C
C density adj at test print reading
○
○
Details
To adjust the offset of C color test print reading signal at
Auto Adjust Gradation (Full Adjust).
When replacing the Main Controller PCB, enter the value
of service label.
As the greater value is set, the image after adjustment
gets darker.
Use case
• When replacing the ADF/Reader Unit
• When replacing the Main Controller PCB
Adj/set/operate method Enter the setting value (switch negative/positive by -/+
key) and press OK key.
Caution
After the setting value is changed, write the changed
value in the service label.
Display/adj/set range
-32 to 32
Default value
0
COPIER > ADJUST > PASCAL
M82 M85
OFST-P-K
Bk density adj at test print reading
○
○
Details
To adjust the offset of Bk color test print reading signal at
Auto Adjust Gradation (Full Adjust).
When replacing the Main Controller PCB, enter the value
of service label.
As the greater value is set, the image after adjustment
gets darker.
Use case
• When replacing the ADF/Reader Unit
• When replacing the Main Controller PCB
Adj/set/operate method Enter the setting value (switch negative/positive by -/+
key) and press OK key.
Caution
After the setting value is changed, write the changed
value in the service label.
Display/adj/set range
-32 to 32
Default value
0
T-8-8
Summary of Contents for Color imageCLASS MF8580Cdw
Page 317: ...5 5 Adjustment Adjustment Overview Adjustment at Parts Replacement...
Page 340: ...7 7 Error codes Error codes Overview Error Codes Jam Code...
Page 349: ...8 8 Service Mode Service Mode Overview COPIER FEEDER FAX TESTMODE...
Page 394: ...Special Tools Solvents and Oils General Circuit Diagram Backup Data Appendex...
