Canon Color imageCLASS MF8580Cdw, Service Manual

Page: 329 / 401

6
6
6-4
6-4
Trouble Shooting > Test Print > Controller test print > Selecting test chart
Trouble Shooting > Test Print > Controller test print > Selecting test chart
■
Selecting test chart
1) Select TESTMODE>PRINT>PG-TYPE in Service mode.
2) Enter TYPE NO from the numeric keypad and press [OK] key.
3) Go to the following Service mode to set up for test print. If no setting is made in Service
mode, the test chart is output based on the default value of each Service mode item.
TESTMODE > PRINT
Item Description Default value
COUNT Enter the number of sheets to output.
Settings: 1-99
1
PHASE
[MF8500 series only]
Select [1-side] or [2-side].
[2-side] selected for 1-side devices is invalid.
Settings: 0=1-side, 1=2-side
0
MODE Specify how to form the image to be output.
Regardless of PG-TYPE settings (0 or 1), the image is
processed in the fixed method.
Settings:
0: T-MIC
1: High LPI screen
2: Low LPI screen
3: T-BIC
0
THRU Select ON or OFF for gamma correction.
Setting:
0: Normal gamma
1: Through (linear) gamma
0
NRKE Flag to switch the color displacement correction processing 1
0: Adopt without processing
1: Adopt with processing
0
BLND Flag to switch the color displacement correction processing 2
0: Adopt without processing
1: Adopt with processing
0
FEED Select the paper source and press [Start] key to output in the
specified settings as set in above steps.
When the multi-purpose tray is selected, the sheet is fed
only when paper in the specified size is set in the tray. When
Cassette 2 is selected but the device has only a cassette,
paper is fed from Cassette 1.
*Any paper source with color paper is invalid for printing.
Setting:
0: MPTray
1: Cassette 1
2: Cassette 2
1
4) Select TESTMODE>PRINT>PG-TYPE>START.
T-6-2