Canon CN-E18-80mm T4.4 L IS KAS S, Operation Manual

Page: 48 / 236

E2 E3
HANDLING THE PRODUCT
WARNING
1. Do not get this product wet or allow liquid inside. If water
gets inside, stop using the product immediately. Continuing
to use the product under this condition may cause a fi re or
electric shocks.
2. Do not stare at the sun or other bright objects through the
lens. It may injure your eyes.
3. Be sure to hold the connector when disconnecting the cable.
Pulling on the cable may sever or damage it and pose a risk
o
f a fi re or electric shocks from a short circuit .
CAUTION
1. Be careful not to drop the product when carrying it. Dropping
the product may cause injury.
2. Ensure that all mountings are securely tightened. If a
mounting becomes loose, parts may fall off and cause injury.
3. Inspect mountings regularly (about every six months to one
year) to ensure they are securely tightened. If a mounting
becomes loose, parts may fall off and cause injury.
4. When this product is used under a blazing sun, the inside
of the unit may be heated to high temperature. When it is
expected that the unit is exposed to elevated temperature,
take measures against heat as appropriate on the
customer’s side
.
NOTE
1. Striking or dropping the lens may cause the malfunction of
the product.
2. This product is not waterproof. Take measures to avoid direct
contact with rain, snow, or moisture. Otherwise it may cause
the malfunction of the product.
3. In dusty environments, cover the lens mount when using,
attaching or removing the lens. If dust enters inside, it may
cause the malfunction of the product.
4. Take measures to avoid sudden changes in temperature
where the lens is used, which may prevent operation
temporarily if condensation forms in the lens.
5. Before use in particular environments, such as places where
chemical products are used, contact your dealer or Canon
representative.