Canon CLC5151, Copying And Mail Box Manual

Page: 246 / 468

Using Image Creation Modes 4-68
4
Spec
ial
Co
p
y
ing and M
a
il Bo
x F
e
atu
res
IMPORTANT
•
You can designate only one polygonal area at a time.
•
You cannot designate a rectangular area and a polygonal area at the same time.
•
You cannot copy or scan documents with the Area Designation mode if you place your originals in the
feeder.
■
Copying
1
Place your originals on the platen glass
➞
press [Special Features]
➞
[Image Creation].
2
Press [Area Designation]
➞
press [Pen Entry].
3
Press [Start Scan].
IMPORTANT
Confirm that the original is placed on the platen glass.
4
Designate the area using the edit pen.
IMPORTANT
You cannot designate a rectangular area and a polygonal area at the same time.
NOTE
•
To clear the last point entered, press [Erase Point]. (Once an area is designated, [Erase Point]
changes to [Clear Area].)
•
To clear a designated area, press [Clear Area].
•
To zoom in on any area on the original, press the ratio drop-down list
➞
select an enlargement
ratio
➞
press [ ], [ ], [ ], or [ ] to display the desired area.