CHAPTER 2
2 - 17
COPYRIGHT 2003 CANON INC. CANOSCAN 9900F REV.0 FEB. 2003 PRINTED IN JAPAN (IMPRIME AU JAPON)
IV. CONTROL SYSTEM
A. Control System Diagram
Figure 2-17
B. Main PCB
The scanner is not equipped with CPU. Control program in the device driver installed in the
host computer includes a control program works as CPU. Control program sends a
command to the ASIC in the main PCB, and the ASIC controls the entire scanning operation.
The main PCB consists of ASIC, DRAM, USB controller, analog I/C and motor driver.
ASIC
+12V
Host
Computer
Main PCB
AC Adapter
Scanning Unit
Inverter &
Scanning Lamp
Drive Motor
DRAM
USB
Controller
Motor
Driver
Control
Program
Analog
IC
IEEE-1394
Controller