Canon Booklet Finisher-AA1, Service Manual

Page: 143 / 228

4. Remove the side covers (front and rear) [1] [2].
• 1 screw [3] each
[3]
[1]
[2]
2x
5. Remove the processing tray.
“ Removing the Processing Tray” on page 102
■ Procedure
NOTE:
Image of removing the return roller.
1. Remove the clip [1] and remove the shaft support [2]
• 2 clips
• 2 shaft support
[2]
[2]
[1]
[1]
2. Remove the return roller [2] from link part [1].
[1]
[1]
[2]
Removing the Swing Roller
■ Procedure
1. Lower the stack tray.
2. Spread the escape roller holder[1] to the arrow in the
figure to remove the escape roller unit[2].
CAUTION:
When removing the swing roller unit, the shaft support
may remove and drop.
[1]
[2]
3. Remove the shaft support [1] and remove the clips
[2]
• 2 shaft support [1]
• 3 clips [2]
4. Parts Replacement and Cleaning
135