manualshive.com logo in svg

Canon BJC-S820D, Quick Start Manual, Page: 78 / 103

Share
Download
Canon BJC-S820D Quick Start Manual Download Page 78

Troubleshooting

71

 

Troubleshooting Printed Output

Problem

Possible Cause

Try This

Printout and 
screen image 
colors appear 
different

Low ink

Verify that you have sufficient ink in the ink tanks. 
See “Monitoring Ink Levels” on page 47.

Printhead may need to 
be replaced

Verify that the printhead is working properly. See “Printing a 
Nozzle Check Pattern” on page 40, and/or “Cleaning the 
Printhead” on page 41.

If necessary, perform multiple printhead cleanings. See 
“Cleaning the Printhead” on page 41, or the 

S820D User’s 

Guide

 on the Setup Software & User’s Guide CD-ROM for 

more information.

Printhead not seated 
correctly

Reseat printhead. See the 

S820D User’s Guide

 on the Setup 

Software & User’s Guide CD-ROM for procedures.

Incorrect printer driver 
or settings

Altering driver settings may improve the appearance of your 
printed image. See “Setting Driver Options” on page 12 for 
instructions on selecting the optimum print mode for a 
print job.

Color settings need to 
be adjusted

You can enhance the color on your printout. See “Adjusting 
Color Balance, Brightness and Saturation” on page 21.

Printed colors are 
incorrect

One or more ink tanks 
are installed in the 
wrong position

Verify that each ink tank is lined up with the correct color 
label in the printhead. For more information, see “Replacing 
Ink Tanks” on page 49.

Smudged or 
smeared ink on 
paper

Ink tanks are not 
seated properly

Check the ink tanks, and reseat them if necessary. 
See “Replacing Ink Tanks” on page 49.

Printhead clogged

Verify that the printhead is working properly. See “Printing a 
Nozzle Check Pattern” on page 40, or “Cleaning the 
Printhead” on page 53.

If necessary, perform multiple printhead cleanings. See the 

S820D User’s Guide

 on the Setup Software & User’s Guide 

CD-ROM for more information.

Ink tank may need to 
be replaced

Verify that you have sufficient ink in the ink tanks. 
See “Monitoring Ink Levels” on page 47.

If necessary, replace the ink tanks. See “Replacing Ink 
Tanks” on page 49.

S820D QSG.book  Page 71  Tuesday, October 23, 2001  12:34 PM

Summary of Contents for BJC-S820D








































































































Reviews:

No comments