Print Head Deep Cleaning
90
Routine Maintenance
Macintosh
1
Ensure that the printer is on.
2
Open the Page Setup dialog box.
The Page Setup dialog box can normally be opened by selecting
Page
Setup...
in the
File
menu.
3
Click
Utilities
to open the Printer Utility dialog box.
4
Select
Cleaning
from the drop-down menu, then click the
Deep Cleaning
icon.
5
Click
OK
.
The POWER lamp will start flashing as print head deep cleaning begins. The process can
take one or two minutes to complete, so wait until the POWER lamp stops flashing.
After print head deep cleaning finishes, print the nozzle check pattern to verify that the print
head is clean. If not, perform print head deep cleaning once more. If the print head is still
not clean after the second deep cleaning, the print head may be worn out, even if ink
remains in the ink tanks. In this event, contact the Customer Care Center.
➡
