Canon B155 User Manual Download

Page: 28 / 140

Setting the TEL LINE TYPE*

Your fax is factory set to work with rotary pulse telephone lines**. If you have a tone line, you will

need to change the telephone line setting as follows.

* TEL LINE TYPE cannot be set in Norway and Denmark.
** The factory setting for the UK, Australia, New Zealand and Singapore is TOUCH TONE.

Press [Function].

Wait a second for TEL REGISTRATION to

appear.

Use [

] or [

] to select USER SETTINGS.

Press [Start/Copy].

Use [

] or [

] to select TEL LINE TYPE.

Press [Start/Copy].

Use [

] or [

] to select TOUCH TONE.

Press [Start/Copy].

Press [Stop] to finish.

Note:

Users in the UK only:

Although this equipment can use either rotary pulse or touch tone, only the performance of the

touch tone setting is subject to regulatory requirements for correct operation. It is therefore strongly

recommended that the equipment is set to use touch tone for access to public or private emergency

services. Touch tone also provides faster call set up.

Function

SELECT MENU

1 sec.

TEL REGISTRATION

Start/Copy

USER SETTINGS

SET DATE

Start/Copy

TEL LINE TYPE

ROTARY PULSE

TOUCH TONE

Start/Copy

DATA ENTRY OK

Stop

SETTING UP

Summary of Contents for B155













































































































































Search results

Summary of Contents for B155

Reviews:

Related manuals for B155

Brands by name

Popular brands

Canon B155, User Manual

Search results

Summary of Contents for B155

Reviews:

Related manuals for B155

Brands by name

Popular brands