Canon 9316A001AA, Simplified Service Manual

Page: 7 / 23

7
3-2. Service Call Errors (by LED Blinking in Orange and Green Alternately, or Lit in Orange)
LED alternate
blinking in orange
and green
Error
Solution
(Replacement of listed parts, which are likely
to be faulty)
2 times Carriage error [5100] - Carriage unit (QM2-1250)
- Timing slit strip film (QC1-4284)
- Logic board ass'y (QM2-1520)
*1
- Carriage motor (QK1-0545)
3 times Paper feed error [6000] - Timing sensor unit (QM2-1545)
- Timing slit disk film (QC1-4851)
- Feed roller ass'y (QL2-0613)
- Platen unit (QM2-1384)
- Logic board ass'y (QM2-1520)
*1
- PAPER FEED MOTOR (QK1-0550)
4 times Purge unit error [5C00] - Purge unit (QM2-1252)
- Logic board ass'y (QM2-1520)
*1
5 times ASF (cam) sensor error [5700] - Sheet feed unit (QM2-1220)
6 times Internal temperature error [5400] - Logic board ass'y (QM2-1520)
*1
7 times Waste ink absorber full [5B00] - Ink absorber (QC1-4222 / 4223 / 4224 /
4263 / 4264 / 4864)
- Bottom case unit (QM2-1249)
*2
8 times Print head temperature rise error [5200] - Print head (QY6-0042)
- Logic board ass'y (QM2-1520)
*1
9 times EEPROM error [6800] - Logic board ass'y (QM2-1520)
*1
11 times Carriage lift mechanism error [5110] - Lift shaft(QC1-4331)
- Photo interrupter (WG8-5624)
- Sheet feed unit (QM2-1220)
- Logic board ass'y (QM2-1520)
*1
12 times AP position error [6A00] - Sheet feed unit (QM2-1220)
- Logic board ass'y (QM2-1520)
*1
13 times Paper feed position error [6B00] - Sheet feed unit (QM2-1220)
- Logic board ass'y (QM2-1520)
*1
14 times Paper feed cam sensor error [6B10] - Sheet feed unit (QM2-1220)
- Logic board ass'y (QM2-1520)
*1
15 times USB Host VBUS overcurrent [9000] - Logic board ass'y (QM2-1520)
*1
16 times Valve sensor error [6C00] - Logic board ass'y (QM2-1520)
*1
17 times Motor driver error [6D00] - Logic board ass'y (QM2-1520)
*1
20 times Other hardware error [6500] - Logic board ass'y (QM2-1520)
*1
Continuous
alternate blinking ROM error - Logic board ass'y (QM2-1520)
*1
Lights in orange RAM error - Logic board ass'y (QM2-1520)
*1
*1: Before replacement of the logic board ass'y, check the waste ink amount (by service test print or
EEPROM information print). If the waste ink amount is 7% or more, also replace the bottom case unit
(QM2-1249) or the ink absorbers (QC1-4222 / 4223 / 4224 / 4263 / 4264 / 4864) when replacing the
logic board ass'y. See 4. SERVICE MODE, for details.
*2: Reset the waste ink counter when replacing the bottom case unit. See 4. SERVICE MODE, for
details.