Aligning the Print Head
If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head
position.
Note
• If the remaining ink level is low, the print head alignment sheet will not be printed correctly.
whose ink is low.
You need to prepare: a sheet of A4 or Letter-sized plain paper (including recycled paper)*
* Be sure to use paper that is white and clean on both sides.
1. Make sure that the power is turned on.
2. Load a sheet of A4 or Letter-sized plain paper in the rear tray.
3. Open the front cover gently, then pull out the paper output tray.
4. Hold down the
RESUME/CANCEL
button until the
POWER
lamp flashes white four times,
then release it immediately.
The print head alignment sheet will be printed and the print head position will be adjusted automatically.
Do not perform any other operations until the printer completes the printing of the print head alignment
sheet. This takes about 2 to 3 minutes.
Note
• If the automatic adjustment of the print head position has failed, the
Alarm
lamp flashes orange.
If an Error Occurs
• If the print results are still not satisfactory after adjusting the print head position as described above,
adjust the print head position manually from the computer.
Aligning the Print Head Position Manually from Your Computer
85
This manual downloaded from http://www.manualowl.com
Summary of Contents for 8747B002
Page 38: ...38 This manual downloaded from http www manualowl com...
Page 48: ...Managing the Printer Power 48 This manual downloaded from http www manualowl com...
Page 51: ...Loading Paper Loading Paper 51 This manual downloaded from http www manualowl com...
Page 101: ...101 This manual downloaded from http www manualowl com...
