Canon 5159B003 Instruction Manual Download Page 119

Page: 119 / 141

118

While [Stop] is displayed on the
LCD monitor, press <

The printing will stop.

When the confirmation dialog appears,
press the <

> keys to select [

then press <

Direct Printing with DPOF

Stopping the Printing

With a card photo printer:

If only one print is being printed, the printing cannot be stopped. If two or

more prints are being printed, the printing will stop with the next print.

With BJ printers:

The printing will stop and the paper being printed will be discharged.

Resuming the Printing

•

On the direct printing screen, after printing is stopped, press the <

keys to select [

Resume

], then press <

•

Printing cannot be resumed in the following cases:

•

Before resuming the printing, you changed the printing options.

•

Before resuming the printing, you erased an image that was to be
printed.

•

When you stopped the printing, CF card’s remaining capacity was
low.

Resolving Printing Errors

If an error occurs during printing, an error message will appear on the LCD
monitor.

•

If [

Resume

] is displayed, correct the error, then select [

Resume

] and

press <

>. After you press <

> and “Stop printing?” appears, select

[

Cancel

] and press <

>. The printing will resume. With certain

printers, the printing may resume automatically.

•

If only [

Stop

] is displayed, press <

>. After correcting the problem,

start over again to print.

Summary of Contents for 5159B003














































































































































Search results

Summary of Contents for 5159B003

Reviews:

Related manuals for 5159B003

Brands by name

Popular brands

Canon 5159B003, Instruction Manual

Search results

Summary of Contents for 5159B003

Reviews:

Related manuals for 5159B003

Brands by name

Popular brands