Canon 5157B002 Page 147 Instruction Manual Download

Page: 147 / 292

147

Menu Function Settings

[

] tab

Movie recording size

The movie will be recorded in [

1280x720

] High-Definition (HD)

quality. You can select the frame rate [

] or [

] (recorded frames

per second) to suit your TV set’s video format.

* The frame rate is expressed as fps or frames per second.

[

] : For areas where the TV video format is NTSC (North

America, Japan, Korea, Mexico, etc.).

[

] : For areas where the TV video format is PAL (Europe,

Russia, China, Australia, etc.).

Total Movie Recording Time and File Size per Minute

Due to the file system, movie shooting will stop automatically if the
file size of a single movie clip reaches 4GB.

You can immediately resume shooting another movie by pressing
the <

> button. (A new movie file starts being recorded.)

Movie-recording

Size

Total Recording Time (approx.)

File Size

(approx.)

4GB Card

8GB Card

16GB Card

[

1280x720

]

17 min.

34 min.

1 hr. 8 min.

222.6 MB/min.

An increase of the camera’s internal temperature may cause movie
shooting to stop before the maximum recording time shown in the table
above (p.150).

The maximum recording time of one movie clip is 29 min. 59 sec.

Movie shooting in Full High-Definition (Full HD) or Standard Definition
(SD) quality is not possible.

With ZoomBrowser EX/ImageBrowser (provided software, p.270), you
can extract still photos from a movie. The quality of the extracted still
photo will be [

1280x720

] for about 920,000 pixels.

COP

Summary of Contents for 5157B002





































































































































































































































































































Search results

Summary of Contents for 5157B002

Reviews:

Related manuals for 5157B002

Brands by name

Popular brands

Canon 5157B002, Instruction Manual

Search results

Summary of Contents for 5157B002

Reviews:

Related manuals for 5157B002

Brands by name

Popular brands