Canon 5157B002, Instruction Manual, Page: 188 / 292

188
You can edit out the first and last scenes of a movie in 1-sec. increments.
1
On the movie playback screen,
select [
X ].
X
The editing screen will be displayed.
2
Specify the part to be edited out.
Select either [ U ] (Cut beginning) or
[ V ] (Cut end), then press <
0
>.
Press the <
U
> key to see the
previous or next frames. Holding it
down will fast forward the frames.
After deciding which part to edit out,
press <
0
>. The portion highlighted
in blue on the top of the screen is
what will remain.
3
Check the edited movie.
Select [
7
] and press <
0
> to playback
the portion highlighted in blue.
To change the editing, go back to step 2.
To cancel the editing, select [
2
] and
press <
0
>.
4
Save the movie.
Select [
W
], then press <
0
>.
X The save screen will appear.
To save it as a new movie, select
[
New file ]. To save it and overwrite
the original movie file, select
[
Overwrite ]. Then press <
0
>.
X
Editing a Movie’s First and Last Scenes
Since the editing is done in 1-sec. increments (position indicated by
[
X ]), the exact position where the movie is edited may differ slightly from
the position you specified.
If the card does not have enough room, [ New file ] will not be selectable.
More movie editing functions are available with ZoomBrowser EX/
ImageBrowser (provided software, p.270).
COP
Y