Canon 4509B020 Basic Operation Manual Download

Page: 40 / 164

2-4

Document and P

aper Handling

This section describes placing the documents on the platen
glass or loading them in the feeder.

Placing Documents on the Platen Glass

Open the feeder.

Place a document face down.

Align the document with the appropriate paper

size marks.

If your document does not match any of the paper size marks, align
the center of your document with the arrow mark.

Close the feeder gently.

The machine is ready to scan the document.

When scanning is complete, remove the document from the
platen glass.

Loading Document in the Feeder

Open the document feeder.

Spread the document guides a little wider than

the document width.

If loading large-sized documents, pull out the tray

extension.

Pull out the tray extension when the document is hanging out of
the document feeder tray.

Placing Documents

CAUTION

Precautions when closing the feeder

• Be careful not to get your fingers caught. This may

cause personal injury.

• Do not press down the feeder forcefully. This may

damage the platen glass and cause personal injury.

Summary of Contents for 4509B020





































































































































































Search results

Summary of Contents for 4509B020

Reviews:

Related manuals for 4509B020

Brands by name

Popular brands

Canon 4509B020, Basic Operation Manual

Search results

Summary of Contents for 4509B020

Reviews:

Related manuals for 4509B020

Brands by name

Popular brands