Canon 45 MC - ZR45MC MiniDV Digital Camcorder Instruction Manual Download

Page: 143 / 164

143

Additional

Information

• AV/PHONES is not set to AV in the

menu (

34).

• AV

DV OUT (Analog-digital

converter) is not set to OFF in the
menu (

93).

• The video heads need cleaning

(

139).

• The TV/VIDEO selector on the TV

isn’t set to VIDEO (

35-36).

• The speaker has been turned off with

the selector dial (

33).

• Headphones are being used.

There’s no picture on the TV
screen.

There’s no picture on the TV
screen, even though the tape is
moving.

There’s no sound coming from the
speaker during playback.

Memory card operations

Cause and/or what to do about it

• It is not turned the right way

(

104). Turn it the right way and

try inserting again.

• Turn the camcorder’s power off and

back on again and remove and
reinsert the card. If the mark
continues to flash, format the
memory card.

• The camcorder is not set to CARD

CAMERA or CARD PLAY (VCR)
mode (

107, 111).

• The memory card is not inserted

(

104).

• You are using an SD Memory Card

and it is set for erasure prevention.
Change the position of the protect
switch.

• The memory card is full. Erase

images (

114) or insert a new

memory card.

• The power source is not properly

connected, or the battery pack is
exhausted or not properly attached
(

13-17, 134).

• The function cannot be used in that

recording program (

59).

Problem

The memory card will not insert.

The

mark flashes red in the

display even though a memory
card has been inserted.

Nothing happens when I press the
buttons.

Summary of Contents for 45 MC - ZR45MC MiniDV Digital Camcorder





































































































































































Search results

Summary of Contents for 45 MC - ZR45MC MiniDV Digital Camcorder

Reviews:

Related manuals for 45 MC - ZR45MC MiniDV Digital Camcorder

Brands by name

Popular brands

Canon 45 MC - ZR45MC MiniDV Digital Camcorder, Instruction Manual

Search results

Summary of Contents for 45 MC - ZR45MC MiniDV Digital Camcorder

Reviews:

Related manuals for 45 MC - ZR45MC MiniDV Digital Camcorder

Brands by name

Popular brands