Canon 3576B001 User Manual Download Page 101

Page: 101 / 164

Viewing Slideshows

101

You can use the following functions in filtered playback for processing the filtered
images at once.

•

“Erasing Images” (p. 29), “

Viewing Slideshows” (p. 101), “

Protecting

Images” (p. 110),“Sele cting Images for Printing (DPOF)” (p. 121)

You can automatically play back images recorded to a memory card. Each
image displays for approximately 3 seconds.

Select

●

Press the

button to select

, then

press the

button.

The slideshow will start a few seconds
after [Loading image…] displays.

●

In filtered playback (p. 100), only images
in a filtered condition play back.

●

You can pause/restart a slideshow by
pressing the

button again.

●

Press the

button to stop the

slideshow.

Filtered Playback

Viewing Slideshows

•

If you press the

buttons or turn the

dial during playback, the

image will switch. If you press and hold down the

buttons you can

fast-forward through images.

•

The power saving function does not work during slideshows (p. 53).

Summary of Contents for 3576B001





































































































































































Search results

Summary of Contents for 3576B001

Reviews:

Related manuals for 3576B001

Brands by name

Popular brands

Canon 3576B001, User Manual

Search results

Summary of Contents for 3576B001

Reviews:

Related manuals for 3576B001

Brands by name

Popular brands