background image

40 

Š

 

Preparations

Using a Memory Card

Memory Cards Compatible for Use with the Camcorder

You can use commercially available 

 SDHC (SD high capacity) 

memory cards and 

 SD memory cards with this camcorder. How-

ever, depending on its Speed Class, you may not be able to record 
movies on the memory card. Refer to the table below.
As of December 2008, the movie recording function has been tested 
using SD/SDHC memory cards made by Panasonic, Toshiba and 
SanDisk.
We recommend using memory cards with a Speed Class 4 or higher.

1

Movies cannot be recorded when the recording mode is set to MXP (24 Mbps) or 
FXP (17 Mbps). 

2

Depending on the memory card used, it may not be possible to record movies.

Memory card

Capacity

SD Speed Class

Recording movies

 

SD 

memory cards

64 MB or less

128 MB or more

1,2

1

 or higher

 

SDHC 

memory cards

Over 2 GB

1

 or higher

About the SD Speed Class:

The SD Speed Class is a standard that indicates the minimum guaran-
teed data transfer speed of SD/SDHC memory cards. When you buy a 
new memory card, look for the Speed Class logo on the package.

COP

Y

Summary of Contents for 3568B001 - VIXIA HF S10 Camcorder
































































































































































































Reviews: