![background image](http://html.mh-extra.com/html/canon/3288b002/3288b002_user-manual_62429078.webp)
Setting Display Status
78
Adjust Input Signal (ANALOG PC) – Vertical
pixels
[Input signal settings] - [Vertical pixels]
You can adjust the number of the pixels in
the vertical direction if the length of the
screen is too long or too short in the verti-
cal direction.
Use [<] / [>] to select a value.
When you have completed the adjust-
ment, press the
MENU
button.
• Perform this adjustment if the [AUTO
PC] function (
) cannot adjust the
project image correctly.
• You can make adjustment either for
[ANALOG PC-1] or [ANALOG PC-2].
Selecting HDMI Input Level
[HDMI input level]
You can select this as required when you
project visual software with the HDMI sig-
nals.
Press the
OK
button to accept your setting
and then press the
MENU
button.
• [Auto] is the factory default.
• You can select this only when the type of
signal sent from AV equipment is RGB.
• The signal level is select automatically in
[Auto] mode. (Some AV equipment may
not support this.)
• If the HDMI output of your AV equipment
allows switching between [Normal] and
[Expanded], we recommend you to set
[Expanded]. The contrast of images will
be improved and dark scenes will be
rendered more realistically. In this case,
select [Auto] or [Expanded] for the
HDMI input level.
For more detailed information, refer to
the User's Manual of your AV equipment
connected to the projector.
HDMI
COMPONENT
DIGITAL PC
VIDEO
ANALOG PC
Input signal settings
Display settings
Vertical pixels
HDMI
COMPONENT
DIGITAL PC
VIDEO
ANALOG PC
HDMI input level
Display settings