Canon 2677B002, User Manual

Page: 97 / 148

97
Setting Various Function
Setting Up Functions fr
om
Menu
s
Extending the Menu Display Time
[Other settings] - [Menu display time]
You can extend the menu display time,
which is 30 seconds usually, to 3 minutes.
Press the OK button to accept your setting
and then press the MENU button.
• [Normal] is the factory default.
• You cannot extend the display time for
the window indicating the completion of
Auto setup (
P46 ), the guide window
( P95 ), the lamp replacement window
(preparation) ( P129 ), or the lamp
replacement window (warning) ( P129 ).
Setting a Password
[Other settings] - [Password settings]
Disables the projector unless the correct
password is entered.
Press the OK button to accept your setting
and then press the MENU button.
• [Off] is the factory default.
• You cannot set [On] unless you have com-
pleted [Register password].
Once you set a password, the password entry
screen appears at power-on.
Enter a 4-digit password with [ ] / [ ] / [<] / [>].
If the password is valid, the projection starts. If
you enter a wrong passwords three times, the
power will be turned off.
HDMI COMPONENT
DIGITAL PC VIDEO/S-VIDEO
ANALOG PC USB
Normal The menu is displayed for 30 sec-
onds.
Extended The menu is displayed for 3 minutes.
Other settings
System settings
Menu display time
HDMI COMPONENT
DIGITAL PC VIDEO/S-VIDEO
ANALOG PC USB
Off The projector can be used even if no
password is entered.
On The projector cannot be used unless you
enter your password.
Other settings
System settings
Password settings
<
<
To Cancel the Password
First, remove the power plug from the AC
outlet, and insert the power plug while
holding down the
MENU button. After a
little, a beep sounds and the password
set is cancelled. (The registered pass-
word is also reset.)