Canon 2438C006 User Manual Download Page 184

Page: 184 / 373

automatically set to print documents based on information such as your computer name or computer login

name.

[Remote UI Access PIN]

Enter the Remote UI Access PIN in the following cases. Setting a Remote UI PIN(P. 147)

●

When a System Manager PIN is not set, and you are logging on in System Manager Mode

●

When you are logging on in General User Mode

Click [Log In].

➠

The Portal page (main page) will be displayed. Remote UI Screen(P. 179)

Remote UI Screen

When you log in to the Remote UI, the following Portal page appears. This section describes the items displayed on

the Portal page and the basic operations.

[Device Basic Information]

Displays the current status of the machine and error information. If an error has occurred, the link to the

Error Information page will be displayed.

[Consumables Information]

Displays information about consumables.

[Support Link]

Displays the support link specified in [Device Information] under [System Management].

Refresh Icon

Refreshes the currently displayed page.

[Log Out]

Logs off from the Remote UI. The Login page will be displayed.

Managing the Machine

179

Summary of Contents for 2438C006






















































































































































































































































































































































































Search results

Summary of Contents for 2438C006

Reviews:

Related manuals for 2438C006

Brands by name

Popular brands

Canon 2438C006, User Manual

Search results

Summary of Contents for 2438C006

Reviews:

Related manuals for 2438C006

Brands by name

Popular brands