background image

4

97

Customization

CUSTOM Dial and Button

You can assign to the CUSTOM button and dial one of several frequently used functions. You can then adjust the 
selected function using the CUSTOM button and dial, without having to access the menu. 

1

S

elect [CU

S

TOM Dial & Button].

 

>

 [

B

 

#

 System Setup] 

>

 [CUSTOM Dial & Button]

2 Touch the de

s

ired option and then touch [

X

].

3 Pre

ss

 the CU

S

TOM button and turn the CU

S

TOM dial to 

u

s

e the a

ss

igned function a

s

 de

s

cribed in the following 

explanation

s

.

Options

NOTES

• Instead of the procedure above, you can press and hold the CUSTOM button to display a quick menu of the 

options. Use the CUSTOM dial to select the desired option and then press the CUSTOM button.

Operating modes:

[

 IRIS / SHTR / GAIN]: 

When the shooting mode is set to 

 or 

, turn the CUSTOM dial to adjust the shutter speed 

or aperture value, respectively.
When the shooting mode is set to 

n

, press the CUSTOM button repeatedly to select the 

value you wish to adjust (aperture value 

 shutter speed 

 gain value). While the desired 

value is highlighted in orange, turn the dial to adjust it.

[

 AGC Limit]: Press the CUSTOM button to turn the AGC limit on/off. When the AGC limit is activated, turn 

the dial to set the maximum gain value.

[

y

 Exposure Comp.]: 

Press the CUSTOM button to lock the exposure and, if necessary, turn the dial to compensate 
the exposure (exposure lock + compensation).

[

j

 Off]: 

Disables the CUSTOM button and dial.

Summary of Contents for 2213C002
























































































































































































Reviews: