background image

4-29

Chapter 4   Web Menu (Administrator Mode)

Mail Server

You can configure the mail server settings for sending e-
mail messages.

Hint

The scanner sends a large volume of data by e-mail. Make sure 
to confirm the mail server settings with your e-mail system 
administrator before configuring the settings.

 

Host Name (Address)

Enter the name or address of the SMTP server (for sending 
e-mail messages).

Port number

Change the port number if necessary. The standard port 
number is 25.

Divided E-mail Size

If the image file attached to an e-mail message is too large 
to send, the file is divided into pieces of the specified size 
before being sent.

IMPORTANT

If the destination mail server does not support divided 
attachments, it may not be possible to reconstitute a divided 
image file sent by the scanner. In such cases, turn off this 
setting, and divide the scanned documents manually before 
sending.

Auth Method

Configure this setting based on the authentication method 
of your mail server. For details on the mail server 
authentication method, consult your e-mail system 
administrator.

IMPORTANT

• If any setting other than [SMTP] is selected for the 

authentication method, the authentication settings for the mail 
server must be configured for each user 

(see p. 4-7)

• If you select a setting other than [SMTP], be sure to register 

users.

Authentication Server

When using a domain server compatible with Active 
Directory, you can log in to the scanner with a user account 
registered on the domain server.
In the authentication server settings, you can register the 
domain server to use as the authentication server. If the 
account information includes e-mail addresses, you can 
configure settings for referring e-mail addresses. 

IMPORTANT

• After configuring an authentication server, restart the scanner 

to update its display.

• When the authentication server and address book server 

(LDAP server) are the same, enter values for all of the 
settings.

• For details on the use and configuration of an authorization 

server, consult your server administrator.

 

Summary of Contents for 220P - imageFORMULA ScanFront





























































































































































Reviews: