68
Manually Setting the Shutter Speed and
Aperture
You can manually set the shutter speed and aperture to shoot
images.
Shooting Mode
1
Use the
W
or
X
button to select the
shutter speed, and use the
S
or
T
button
to select the aperture value, then shoot.
z
When you press the shutter button
halfway, the difference between the
standard exposure* and the
selected exposure appears on the
LCD monitor (or viewfinder). If the
difference is more than 2 stops, “-2”
or “+2” appears on the LCD monitor
(or viewfinder) in red.
* The standard exposure is calculated by
measuring the brightness according to
the selected metering method.
z
If the zoom is adjusted after these values are set, the
aperture value or the shutter speed may change in
accordance with the zoom position.
z
The brightness of the LCD monitor (or viewfinder) matches
the selected shutter speed and aperture value. When you
select a fast shutter speed or shoot a subject in a dark
place, raise the flash and then set it to
(Flash on) or
attach an externally mounted flash (p. 172), the image will
always be bright.
Standard exposure
Exposure Level
Indicator
Summary of Contents for 2077B001
Page 198: ...196 MEMO ...
