manualshive.com logo in svg

Canon 1855B002, Quick Start Manual

Share
Download
Canon 1855B002 Quick Start Manual Download Page 55

51

Troubleshooting

„

POWER Lamp Flashes Green and ALARM Lamp Flashes Orange 
Alternately

Disconnect the printer cable from the printer, turn the printer off, and then unplug the printer from 
the power supply. Plug the printer back in and turn the printer back on after leaving it for a while.
If the problem is not resolved, contact your Canon Service representative.

Error Message Appears on the Screen

„

Writing Error/Output Error/Communication Error

Sixteen Flashes: Ink level cannot be 
detected.

Ink may have run out.
The function for detecting the remaining ink level will be disabled since the ink 
level cannot be correctly detected.
If you want to continue printing without this function, press the RESUME button 
for at least 5 seconds.
Canon recommends to use new genuine Canon cartridges in order to obtain 
optimum qualities.
Please be advised that Canon shall not be liable for any malfunction or trouble 
caused by continuation of printing under the ink out condition.

Cause

Action

The printer is not ready.

Confirm that the 

POWER

 lamp is lit.

If the 

POWER

 lamp is off, turn the printer on.

While the 

POWER

 lamp is flashing green, the printer is initializing. Wait until the 

POWER

 lamp stops flashing and remains lit green. 

If the 

ALARM

 lamp is flashing orange, an error may have occurred on the 

printer. For details on how to resolve the error, see “ALARM Lamp Flashes 
Orange” on page 50.

Printer port setting does not match the 
computer’s interface connecting the 
printer.

Check the printer port settings.

(1)

Click 

Start

 > 

Control Panel

 > 

Printers and Other 

Hardware

 > 

Printers and Faxes

.

In non-XP Windows, click 

Start

 > 

Settings

 > 

Printers

.

(2)

Click the 

Canon iP1800 series

 icon.

(3)

Open the 

File

 menu and select 

Properties

.

(4)

Click the 

Ports

 tab to confirm the port settings.

Make sure that a port named 

USBnnn (Canon iP1800 series) 

(where “n” 

is a number) is selected for 

Print to the following port(s)

.

If the port setting is not correct, change the port setting according to the 
interface you are using, or reinstall the printer driver.

The printer is not connected properly.

Make sure that the printer cable is securely plugged in to the printer and the 
computer.

z

If you are using a relay device such as a USB hub, disconnect it, connect the 
printer directly to the computer, and try printing again. If printing starts 
normally, there is a problem with the relay device.
Consult the reseller of the relay device for details.

z

There could also be a problem with the USB cable. Replace the USB cable 
and try printing again.

Printer driver is not installed properly.

The printer driver may not be installed properly. Uninstall them following the 
procedure described in the 

Printer Driver Guide

 on-screen manual and reinstall 

them following the procedure described in the 

Easy Setup Instructions

.

Cause

Action

Summary of Contents for 1855B002









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands