Canon 1692B002, Service Manual

Page: 86 / 200

Chapter 3
3-14
F-3-29
4) Place the media take-up sensor unit under the bottom stand stay, than pull up the cord of the media take-up sensor unit through the hole of the right stand leg.
F-3-30
5) With the media take-up sensor unit against the underside of the bottom stand stay and the right stand leg, insert M4 hex screws in the three holes [1] and slide
the screws out of the way toward the narrow end of the protruding holes. Insert M4 hex screws in the small holes [2] as well. Than, tighten all five M4 hex screws
firmly.
[2] [1]
[3]
[4]
[5]
[5]