Canon 1692B002, Service Manual

Page: 76 / 200

Chapter 3
3-4
F-3-6
2) Secure the bottom stand stay to the left stand leg and the right stand leg using four M4 hex screws on each side.
F-3-7
3) Hold one end of the stand while a partner holds the other end. Rotate both end of the stand at the same time to stand it upright.
F-3-8
Rotate both ends of the stand simultaneously when standing the stand upright. Rotating only one side before the other may bend the stand and cause problems in
assembly.
4) Insert the left end of the top stand stay into the side hole [1] on the left stand leg, and insert the right end of the top stand stay into the side hole [2] on the right
stand leg, pushing the stay in completely.
[2]
[1]