manualshive.com logo in svg

Canon 1438B002 - PIXMA iP4300 Photo Printer, Quick Start Manual

Share
Download
Canon 1438B002 - PIXMA iP4300 Photo Printer Quick Start Manual Download Page 37

33

Routine Maintenance

5

Install the ink tank.

(1)

Insert the front end of the ink tank into the Print 
Head.

(2)

Press on the 

 mark on the ink tank until 

the ink tank snaps firmly into place.

(3)

Make sure that the ink lamp lights up red.

6

Close the Inner Cover.

7

Close the Top Cover.

Important

The printer cannot be used unless all the ink tanks are 

installed.

Note

Make sure that the Inner Cover is closed. Printing will 

not start with the Inner Cover open since paper can not 

be fed properly.

Note

z

If the 

ALARM

 lamp still flashes orange after the Top Cover is closed, see “ALARM Lamp 

Flashes Orange” on page 76.

z

When you start printing after replacing the ink tank, Print Head Cleaning is performed 

automatically. Do not perform any other operations until Print Head Cleaning finishes. The 

POWER

 lamp flashes green during cleaning.

(1)

(2)

(3)

*1

*1 Make sure the position of the 

tank matches the label.

Summary of Contents for 1438B002 - PIXMA iP4300 Photo Printer







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands