Canon 0585C006, Instruction Manual

Page: 73 / 108

73
Wireless Settings
To perform flash shooting using the optical transmission wireless
receiver function, configure the settings as follows.
Set to < :
i
>.

Operate and set the flash you want to
set as the receiver unit.

Press the < I > button of the <
S
>
cross keys.

Turn <
9
> to select <
: i
>,
then press <
8
>.
To avoid interference with optical transmission wireless flash systems
used by other photographers, you can change the transmission
channel.
Set the same channel for both the sender unit and
receiver unit.
Set a channel.

Press <
8
>.

Turn <
9
> to select the channel
symbol, then press <
8
>.
Wireless Settings
Receiver Unit Setting

Turn transmission wireless sensor (p.10) of the receiver unit toward the
sender, using the bounce function (p.28).

When shooting indoors, since the transmission signal is reflected off the
walls, operation may be possible even with slightly imprecise positioning.
Transmission Channel Setting
To perform normal flash shooting, select <
F
> to clear the wireless
(receiver) settings.