Canon 0585C006, Instruction Manual

Page: 53 / 108

53
Wireless Settings
You can check the transmission status by viewing the color of the
<
D > lamp.
You can set whether or not to fire the sender unit as a wireless flash that
controls the receiver unit. When sender flash firing is set to ON, the
sender unit is fired as firing group A.
Set sender flash firing to ON or
OFF.

Press < 8 >.

Turn < 9 > to select the flash firing
symbol, then press < 8 >.

Turn < 9 > to select sender flash
firing ON or OFF, then press < 8 >.
j : Sender flash firing ON
` : Sender flash firing OFF
The < D > Lamp
Color Status Description Action
Green Lit Transmission OK –
Red
Lit Not connected Check the channel and ID.
Blinking
Too many units
Change the sender and receiver unit total
to 16 or less.
Error
Turn the sender unit and receiver unit off
and on again.
Sender Flash Firing ON/OFF

If the transmission channels of the sender unit and receiver unit are
different, the receiver unit will not fire. Set both to the same number or
set both to “AUTO”.

If the wireless radio IDs of the sender unit and receiver unit are different,
the receiver unit does not fire. Set to the same number.