Canon 0286B001 - Optura S1 Camcorder Instruction Manual Download Page 80

Page: 80 / 149

Selecting the Still Image Size and Quality

Available only in the

mode (the image quality only can also be set in the

mode).

1. Press the FUNC. button.
2. Select the still image size/quality symbol.

The symbol of the current setting is displayed.

3. Select the still image size.

The number at the lower right corner indicates the number of still images available on
the memory card (the same as the number displayed at the upper right corner).

4. Select the still image quality.
5. Press the FUNC. button.

Selecting the Movie Size

Available only in the

and

modes.

1. Press the FUNC. button.
2. Select the movie size symbol followed by the setting option.

• The symbol of the current setting is displayed.
• The number at the lower right corner indicates the remaining recording time on card

(the same as the number displayed at the upper right corner).

3. Press the FUNC. button.

(

51)

1632x1224/FINE

(

51)

320x240

Summary of Contents for 0286B001 - Optura S1 Camcorder






















































































































































Search results

Summary of Contents for 0286B001 - Optura S1 Camcorder

Reviews:

Related manuals for 0286B001 - Optura S1 Camcorder

Brands by name

Popular brands

Canon 0286B001 - Optura S1 Camcorder, Instruction Manual

Search results

Summary of Contents for 0286B001 - Optura S1 Camcorder

Reviews:

Related manuals for 0286B001 - Optura S1 Camcorder

Brands by name

Popular brands