background image

 

NOTICE 

Canoga Perkins has prepared this users manual for use by customers and Canoga Perkins personnel as 
a guide for the proper installation, operation and/or maintenance of Canoga Perkins equipment. The 
drawings, specifications and information contained in this document are the property of Canoga 
Perkins and any unauthorized use or disclosure of such drawings, specifications and information is 
prohibited. 

Canoga Perkins reserves the right to change or update the contents of this manual and to change the 
specifications of its products at any time without prior notification. Every effort has been made to 
keep the information in this document current and accurate as of the date of publication or revision. 
However, no guarantee is given or implied that the document is error free or that is accurate with 
regard to any specification. 

 

Canoga Perkins Corporation 

20600 Prairie Street 

Chatsworth, California 91311-6008 

Business Phone:  (818) 718-6300 

(Monday - Friday 7 a.m. - 5 p.m. Pacific Time) 

FAX:  (818) 718-6312 (24 hrs.) 

Web Site:  

www.canoga.com

 

Email:  

[email protected]

 

 

Copyright © 1999 - 2005 Canoga Perkins Corporation 

All Rights Reserved 

EdgeAccess

® 

Universal Chassis System 

Model 3240S 

User Manual 

Model Number 3240S-UM 

Product Number 6910380 

Rev. H  11/2005 

MM 

 

Summary of Contents for 3240S



















































Reviews: