Cannondale Trigger 29ER, Owner'S Manual

Page: 19 / 38

18 18
aBOuT THIS SuPPlEMEnT
This supplement includes information for the proper installation and set up of
XFuSIOn
shocks in the following Cannondale models: TRIGGER 29’ER allOY and both JEKYll and
SCaRlET . In addition to this supplement, follow the owner’s manual supplement infor-
mation for your specifi c bike and the
XFuSIOn
owner’s manual.
Cannondale supplements : http://www.cannondale.com/manuals/
XFUSION manuals: http://www.xfusionshox.com/
MOunTInG THE SHOCK In THE FRaME
Install the shock in the frame with the remote assembly facing forward as shown. Apply
Loctite 242 (blue) and tighten with a good torque wrench.
nOTICE: Incorrect shock
installation can result in serious frame damage.
MEaSuRInG SaG
Some bike models have sag indicators integrated with the frame shock link; see your owner’s
supplement. Sag can be measured by the difference between the shock mounting bolts when
rider is on and off the bike. The reco mmended air pressure setting for the different models
are shown on page 2. Use a high-pressure pump: Cannondale
1MP01/SLV.
1MP01/SLV
XFuSIOn Pull SHOCK SET-uP InFORMaTIOn