10
10
FLOW mode
(long travel)
120/130 mm
FWD
ELEVATE mode
(short travel)
70/80 mm
Setting Sag:
1.
Set shock to the 120/130 mm (long travel)
mode with the remote lever.
In this mode, the
sag you set will be 100%.
2. When the DYAD RT2 is switched to the 70/80 mm
mode, the sag is automatically reduced to 60%.
3.
Remove
negative air valve cap.
Connect the pump (Cannondale
1MP01/SLV
)
to the negative air pressure valve, press
and hold the release button to release all air
pressure.
Replace the valve cap.
4.
Remove
positive air valve cap. attach the
pump to positive air valve.
Set positive air pressure for your weight
according to the
DYaD RT2 Recommended air
Pressure
table. Replace the valve cap.
5. Again,
attach pump to
negative air
chamber valve and set negative air pressure
for same weight.
Replace the valve cap.
After setting sag, you find that you want more
or less sag, choose the next lighter or heavier
rider weight range from the table. Repeat steps
1-5 again.
Left-hand lever set-up shown
here.
Summary of Contents for Trigger 29ER
Page 36: ...35 129920 PDF 35...
