background image

102

PB

PART II

APPENDIX H.

FOREIGN OBJECTS ARE VERY HAZARDOUS

WARNING

DO NOT RIDE OVER STICKS OR DEBRIS (FOREIGN OBJECTS).

 

We are aware of rare but very serious accidents where a foreign object was kicked up, 

entered the spokes of the front wheel, was swept around and either broke the fork or 

stopped the wheel. The forensic evidence was clear, even if the object itself could not later 

be located. 

See Part II, Section D for some information on how frame and fork materials can be broken.  

AVOID RIDING OVER STICKS, DEBRIS: 

The riders were taken by surprise and crashed hard.  As many riders know, the road side 

can be littered with a great variety of debris. Common items are sticks, branches, auto 

parts and trash. 

BE AWARE OF THE PATH AHEAD, TO AVOID: 

Scan ahead and if you see debris ride around it. Before moving from your predictable path 

of travel, look over your shoulder to be sure you can do so safely. If you are riding with a 

group and at the front, point out debris.  

RIDING OVER OR INTO DEBRIS COULD LEAD TO AN ACCIDENT, WITH RISK OF 

SERIOUS INJURY, PARALYSIS OR DEATH.

Summary of Contents for SuperSlice











































































































Reviews: