14
SuperSix EVO OMS
Technical Information
Rear Derailleur Mount (RD)
151901 Rev. 0 (09/22)
2 N·m
3
1
2
M3 X 14mm
GREASE
Loc 242
To replace:
1. Remove the rear axle.
2. Remove the screws (2).
3. Remove the hanger (1) and
thru axle nut (3).
4. Clean the area around the dropout and
inspect the frame carefully for any cracks
or damage. If you find damage, have the
frame inspected by your Cannondale
Dealer .
If the frame is not damaged, apply a light
film of grease between the frame and
hanger. This will help minimize any noise
or “creaking” that might result from
slight movement between the frame and
hanger.
5. Slide the new hanger and thru axle nut
onto the frame.
6. Apply Loctite® 242 (or medium strength
thread lock) to the screw threads and
tighten to the specified torque. Do not
over-tighten.
Rear Derailleur Mount (RD)
1. RD Hanger
2. Screws
3. Thru axle nut
As an option, this frame supports installation
of a Cannondale SmartSense.
What is SmartSense?
SmartSense is a system of powered
accessories. Each accessory shares the same
data communication and same rechargeable
battery. The behavior of each accessory can
be programmed and controlled independently
or coordinated with any other component via
the Cannondale App.
SmartSense Owner’s Manual
https://www.cannondale.com/-/media/
files/manual-uploads/cy22/138691-rev1-
cd-cy22-smartsense-owners-
manual-020922.ashx
The SmartSense Owner’s Manual contains
important safety information and information
regarding how to identify, to set up, and to
operate any installed/attached SmartSense-
compatible components.
SmartSense
Summary of Contents for SuperSix EVO
Page 27: ......
