Cannondale Jekyll, Owner'S Manual Supplement

Page: 19 / 28

17
126560.PDF
Recommended Air Pressure
DYAD RT2 shock sag best performance range is 33%-40% of total travel. The table below contains values for this target range.
After setting sag, you find that you want more or less sag, choose the next lighter or heavier rider weight range from the table.
Repeat Sag Setting steps 1-5 again.
TOTAL RIDER WEIGHT
AIR PRESSURE
POSITIVE AIR VALVE NEGATIVE AIR VALVE
lbs kg psi bar psi bar
100 - 109 45 - 49 188 13.0 159.0 11.0
110 - 119 50 - 54 207 14.3 175 12.0
120 - 129 54 - 59 226 15.6 191 13.1
130 - 139 59 -63 245 16.9 206 14.2
140 - 149 64 - 68 264 18.2 222 15.3
150 - 159 68 - 72 282 19.5 238 16.4
160 - 169 73 - 77 301 20.8 254 17.5
170 - 179 77 - 81 320 22.1 270 18.6
180 - 189 82 - 86 339 23.4 286 19.7
190 - 199 86 - 90 358 24.7 302 20.8
200 - 209 91 - 95 376 26.0 318 21.9
210 - 219 95 - 99 395 27.3 334 23.0
220 - 229 100 - 104 414 28.6 349 24.1
230 - 239 104 - 108 433 29.8 365 25.2
240 - 249 109 - 113 450 31.1 381 26.3
LOW PRESSURE LIMITS: 100 6.9 0 0
HIGH PRESSURE LIMITS: 450 31.1 400 27.6
NOTICE
TO PREVENT DAMAGE TO THE SHOCK: 1. Follow the setting sag step in order. 2. Follow/maintain high and low
pressure limits. 3. Make sure the suspension pump and DYAD RT2 valves are clean before attachment.
WARNINGS
USE ONLY HIGH-PRESSURE AIR PUMP - CANNONDALE - 1MP01/SLV TO SET OR READ PRESSURE
Use of an
incompatible pump (one not designed for the high pressure range of the shock) , can result serious personal injury or
result in an improper pressure setting or reading which can contribute to a loss of rider control and accident.
Disconnecting the pump results in very small pressure loss. To determine actual loss for your pump, set pressure, disconnect and
reconnect. You can compensate by adding the loss to the table values.