20
21
E-Series Owner’s Manual Supplement - 129184.PDF
Esp
añol
ITal
Ia
No
NEDER
la
ND
s
FR
aNÇ
aI
s
DEUT
sCH
ENG
lI
sH
Esp
añol
ITal
Ia
No
NEDER
la
ND
s
FR
aNÇ
aI
s
DEUT
sCH
ENG
lI
sH
Cleaning
When cleaning your bike, use a damp sponge or a soft brush with only a mild soap and water solution. Rinse the
sponge often. Do not spray water.
notICe
Do not use a pressure washer or dry with compressed air. This will force contaminants into sealed
areas, electrical connections/components promoting corrosion, immediately damaging, or result
in accelerated wear.
WarnInG
keeP Water aWay from the eleCtrICal ComPonents.
make sUre the BIke Is seCUred UPrIGht and Can not fall oVer aCCIdentally WhIle yoU
are CleanInG It.
Don’t rely on the kickstand. Use a sturdy portable bicycle wheel stand to hold
the bike upright.
tightening torques
Correct tightening torque for the fasteners (bolts, screws, nuts) on your bicycle is very important to your safety.
the durability and performance of your bicycle. We urge you to have your Dealer correctly torque all fasteners
using a torque wrench.
desCrIPtIon
nm
In lbs
loctite™
Kickstand
7.0
62.0
242 (blue)
Rear Rack Mounting Bolts
3 - 4
26.5 - 35.4
lockout lever screw
0.5
4.0
stem/Handlebar Clamp Bolts
6.0
53.0
Handlebar Fixing Bolt
17 - 18
150 - 160
Rear Derailleur Hangar screws
2.5
22.0
If you decide to tighten fasteners yourself always use a good torque wrench!
