Cannondale en 14764, Supplemental Owner'S Manual

Page: 18 / 27

16 17
E-Series Owner’s Manual Supplement - 129184.PDF
Esp
añol
ITal
Ia
No
NEDER
la
ND
s
FR
aNÇ
aI
s
DEUT
sCH
ENG
lI
sH
Esp
añol
ITal
Ia
No
NEDER
la
ND
s
FR
aNÇ
aI
s
DEUT
sCH
ENG
lI
sH
error Code Indication
The components of the eBike system are continuously and automatically monitored. When an error is detected, the
respective error code is indicated in text indication (c).
To return to the standard indication, press any button on the drive HMI (3) or on the operating unit (10). Depending
on the type of error, the drive is automatically shut off if required. Continued travel without assistance from the
drive is possible at any time. However, have the eBike checked before attempting new trips.
■
have all inspections and repairs carried out only by an authorized Cannondale dealer. When an error is
still displayed despite corrective measures, please also refer to an authorised bicycle dealer.
Code Cause Corrective measure
100 Internal error of the drive unit Have the drive unit checked
101 Connection problem of the drive unit Have connections and contacts checked
102 Error of the speed sensor Have the speed sensor checked
103* Connection problem of the lighting system Have connections and contacts checked
104 Connection problem of the drive HMI Have connections and contacts checked
105 Temperature of the drive unit too high (above
40 °C) allow the drive unit to cool down. Continued travel without
assistance from the eBike drive is possible and speeds up
the cooling of the drive unit.
200 Internal electronic error of battery pack Have battery pack checked
201 Temperature of the battery pack too high
(above 40 °C) allow the battery pack to cool down. Continued travel
without eBike drive is possible and speeds up the cooling of
the battery pack.
202 Temperature of the battery pack too low
(below –10 °C) allow the battery pack to warm up slowly in a warm location.
203 Connection problem of battery pack Have connections and contacts checked
204 Incorrect polarity of battery pack Charge the battery pack with the original Bosch charger as
described in the operating instructions.
410 one or more buttons of the drive HMI are
blocked. Check if any buttons are blocked, e.g. from dirt or debris.
Clean the buttons, if required.
414 Connection problem of the operating unit Have connections and contacts checked
418 one or more buttons of the operating unit are
blocked. Check if any buttons are blocked, e.g. from dirt or debris.
Clean the buttons, if required.
422 Connection problem of the drive unit Have connections and contacts checked
423 Connection problem of battery pack Have connections and contacts checked
424 Communication error among the components Have connections and contacts checked
430 Internal battery pack of drive HMI empty Charge drive HMI (in holder or via UsB port)
490 Internal error of the drive HMI Have the drive HMI checked
* only for eBike lighting via battery pack (country-specific)