Cannondale Carbon Road Disc, Quick Start Manual

Page: 4 / 16

Getting your bike ready for assembly.
Let’s get your bike out of the box.
This video applies to one Cannondale Platform:
• Topstone Carbon, Synapse Carbon, Super X
Tools Needed:
• Flat-Head Screwdriver
• Phillips-Head Screwdriver
• Box Cutter
• Scissors
Tools Included:
• Torque Wrench
• Allen Keys
• Pedal Wrench
Gently lift your bike out of the box and set
it on top of the box. Make sure the attached
wheel is facing upwards
SET-UP STEP 2 STEP 1 STEP 3 STEP 4 PRE-RIDE CHECK
Inside the box, you’ll find a smaller box of parts, necessary tools,
documentation and manuals. Once the bike is assembled, but
before you ride, please read the owner’s manual.
First, locate the staples on the top of the box and carefully remove
them with a screwdriver. Use caution: the staples are sharp.
Push the hand flaps from the inside to the outside of the box. This
will make removing the bike easier.
Carefully lift the bike out of the box and set it onto the top of the box.
Remove the front wheel from the bike by carefully removing the zip
ties or Velcro. Then, remove all packaging from the wheel and set it
aside.
Remove all additional packaging from the bike, letting the handlebar
gently hang from the frame.
A.
B.
C.
D.
E.
C