8
137370 Rev 1.
English
CAAD13 - Owner’s Manual Supplement
2 N·m
2
2
NGLI-2
1
a
3
To replace:
Remove the rear axle.
Remove the mounting screws and remove
the old hanger from the dropout. Clean the
area around the dropout and inspect the
frame carefully for any cracks or damage. If
you find damage have the frame inspected
by your Cannondale Dealer .
If the dropout is un-damaged, apply a light
film of grease between the frame and
mount. This will help minimize any noise or
“creaking” that might result from very slight
movement between the dropout and hanger
during movement of the derailleur.
Slide the new hanger onto the dropout.
Apply Loctite® 242 (or medium strength
thread lock) to the screw threads and tighten
to the specified torque.
Rear Derailleur Mount
1. RD Hanger
2. Screw
3. Removable cable
stop
a. Di2 wire exit
1
Serial Number
The serial number is located on the bottom
bracket. It is a 7-character barcode (1). Use
this serial number to register your bike.
To register your bike: go to the
Product Registration section of our
website at
www.cannondale.com
(DISC model shown)
