Cannondale Bicycle Owner'S Manual Download Page 96

Page: 96 / 102

PaRt ii

aPPendiX f

BiCyCle tRaineRs

Potential damage

CaUtion

improperly mounting a bike in a trainer, or

using one that is not compatible with your

particular bike frame can cause serious

damage.

This kind of damage is not covered by the

Cannondale Limited Warranty.

Ask you dealer for help with trainers, the right one

and the correct way to use it.

If you ride a trainer that requires removal of the front

wheel and clamps the fork dropouts: Be sure your

fork quick release is tight! Relative movement will

wear parts, weaken and damage your bike.

If you ride a trainer that holds the bike up by clamping

the rear quick release between two cones: Take off

the nice, lightweight quick release that came with

your bike. Substitute a heavy, classic all steel quick

release and clamp it tight! Relative movement will

wear parts, weaken and damage your bike. Note that

many modern quick releases will not fit the clamping

cones in this kind of trainer because their shapes are

incompatible.

Be particularly cautious with a carbon frame or fork.

Carbon is relatively soft, not abrasion resistant. If there

is any relative movement, carbon will wear quickly.

If you ride a trainer a lot, consider using an old

bike: Corrosion from sweat will take it’s toll.

Weight is irrelevant. Save wear on your expensive

components.

Risk to Children

WaRninG

keeP ChildRen aWay fRom BiCyCles

moUnted on stationaRy tRaineRs, even

When the BiCyCle is not in Use.

Spinning wheels attract children’s attention and

present a serious risk to young fingers.

Children have also been known to rotate cranks

by hand on bicycles left unattended on stationary

trainers, putting themselves at risk of serious

injury.

Summary of Contents for Bicycle







































































































Search results

Summary of Contents for Bicycle

Reviews:

Related manuals for Bicycle

Brands by name

Popular brands

Cannondale Bicycle, Owner'S Manual

Search results

Summary of Contents for Bicycle

Reviews:

Related manuals for Bicycle

Brands by name

Popular brands