background image

  

OWNER’S MANUAL 

NOTE: Do not return your CANNON® Downrigger to your 
retailer. Your retailer is not authorized to repair or replace this 
unit. You may obtain service by: 

• 

calling CANNON® at 1-800-227-6433; 

• 

returning your downrigger to the Factory Service Center; 

• 

sending or taking your downrigger to any CANNON® 
Authorized Service Center on enclosed list. 

Please include proof of purchase, serial number and purchase 
date for warranty service with any of the above options. 

CAUTION:  
READ THIS MANUAL CAREFULLY 
BEFORE OPERATING YOUR NEW 
CANNON

®

 DOWNRIGGER. 

RETAIN FOR FUTURE REFERENCE.  

Uni-troll 10ts 

Uni-troll 5 

Introduction to Downriggers  

pg. 2 

Mounting Your Downrigger  

pg. 2-7 

Attaching the Crank Handle  

pg. 8 

Terminator & Line Release  

pg. 9 

Cannon Uni-Release 

pg. 9 

Attaching the Rod Holder 

pg. 10 

Operating Your Downrigger  

pg. 11 

The Effects of Blowback  

pg. 12 

Maintaining Your Downrigger  

pg. 13 

Troubleshooting  

pg. 13 

Trolling Tips  

pg. 14 

Warranty Information  

pg. 15 

Cannon Service Policy  

pg. 15

  

Authorized Service Centers  

pg. 16

  

Uni-troll 10 

Summary of Contents for Uni-Troll 10





























Reviews: