CANNON
®
TE-1500 Thermoelectric Constant Temperature Bath
Revision 1.1b—January, 2007;
CANNON
®
Instrument Company
2139 High Tech Road • State College, PA 16803 • USA
15
CHAPTER
3
BATH OPERATION
Setting the temperature
Front Panel Description
The controls for the TE-1500 are divided into 4 different “control areas”,
as shown on the front panel (see
Figure 7
). In this manual, the four
control areas will be abbreviated as follows:
Front Panel Control Areas
CONTROL AREA
ABBREVIATION
POWER
P
TEMPERATURE
T
TEMPERATURE ADJUST
TA
HEAT
H
Figure 7: TE-1500 front panel
Start-up Procedure
1. Verify that the TE-1500 has been assembled and installed correctly.
2. Turn the bath
POWER
switch on. The green lamp above the
POWER
switch should illuminate, indicating the thermostat is functioning. The
green lamp in the switch indicates active “mains” power.
Summary of Contents for TE-1500
Page 1: ...TE 1500 Constant Temperature Bath Instruction Operation Manual ...
Page 2: ......
Page 39: ......
