Manual mode.
The
manua
l mode allows setting the temperature at any level.
To select Manual mode, firstly the thermostat must be turned on, then press
and release the ‘
A/M
’ button until
MANUAL
appears on the display.
Flame height and Fan speed.
The flame height and fan speed are not manually adjustable. The flame
height and fan speed are set by the thermostat according to the
difference between the set temperature and the current temperature.
The flame height (Low or High Fire) or Fan Speeds are not manually
adjustable.
They are automatically controlled by the thermostat in the program cycle.
This will vary according to the selected temperature and the actual room
temperature.
The display may show a Medium Fire symbol during operation however
this function is not available with this heater and the heater will be operating
on High Fire when Medium fire symbol is displayed.
Adjusting the temperature.
In the
manual
mode, adjust the set temperature by pressing or releasing
the ‘
UP’
or ‘
DOWN
’ buttons. Press and hold the ‘
UP
’ or ‘
DOWN
’ buttons
to increase or decrease the temperature by 1°C every 0.5 seconds..
Automatic mode.
The
automatic
mode allows the temperature to be regulated according to a
programmed level and time.
With the thermostat on, press and release the ‘
A/M
’ button until the word
AUTO appears on the LCD.
To correctly operate in
automatic
mode, the
time and day of the week
must be set.
The thermostat will now operate according to the program set for the
current time period. Programming instructions are found on page 10.
Manually overriding the set program.
At any time, the temperature or fan speed may be adjusted up or down
similar to operating in
manual
mode.
However, whenever the thermostat changes to a new time period, the
temperature will be
reset
automatically according to that period’s setting.
Page 9.
Programming
Each day of the week can be programmed individually for periods P1, P2,
P3, and P4, making a total of 28 programmed periods.
Alternatively, a weekday program can be set, so the same program is used
for Monday to Friday. Similarly, a weekday program can be set for Saturday
- Sunday. The entire week can also have the same program.
Alternatively, a weekday or weekend program can be set with individual
programs for the remaining days.
The suggested period settings for each day/s are:
Period 1 - morning (Wake up)
Period 2 - daytime (Away)
Period 3 - evening (Coming home)
Period 4 - night time. (Sleep)
To begin programming.
With the thermostat off, press and hold the ‘
P
’ button for 2 seconds or longer
to initiate programming. The LCD will display
PROG, Pd
and the time at
which the thermostat is currently set
MO
will flash.
Period 1 can now be set.
Setting the day of the week.
You must choose which day/s of the week you wish to program.
Press and release the ‘
UP
’ or ‘
DOWN
’ button to change the day of the week
to the following or previous day. Press and hold the ‘
UP
’ or ‘
DOWN
’ button
for 2 seconds or longer to increase or decrease the day of the week by
1 day every 0.5 seconds.
The order that you can scroll through the days is as follows:
MO>TU>WE>TH>FR>MO TU WE TH FR>SA>SU>SU SA>MO TU WE TH FR SA SU
To accept the selected day/s of the week press ‘
OK
’.
Page 10.
