Cannon Magnum 10 STX TS, Owner'S Manual

Page: 13 / 38

13
www.cannondownriggers.com
Installation
TERMINATING THE DOWNRIGGER CABLE
TIP: Use only straight cable when routing through the terminator. Worn or kinked cable can be
stressed and may break prematurely when retrieving trolling weights.
ATTACHING THE LINE RELEASE (UNI-RELEASE)
The Cannon Uni-Release attaches directly to the
downrigger weight. Attach fishing line to the clip at the
end of the release, and then click through a series of
increasing tension settings. The release can be used
with any test line on salt or fresh water and may be
adjusted from 2 to 22 pounds of grip tension on the
line.
To change line release tension, turn tension knob
to (+) to increase or (-) to decrease. Tension also may
vary according to where the line is placed in the grips.
Higher tension is on the line if it is set back toward the
hinge, and lower if set closer to the opening. To open
the release, spread the release arms with thumb and
forefinger applying pressure to the sides.